Brand & appliance guide
AEG Tumble Dryer Spares
Find drive belts, pulleys, rollers, heaters, thermostats and door handles for AEG tumble dryers. Start with the complete AEG PNC / product number, then continue to the matching catalogue.
Browse AEG Tumble Dryer parts →Direct catalogue routes
Popular AEG parts
Compatibility first
Use the complete AEG PNC / product number
Record the full model and PNC (product number) from the rating plate. The PNC identifies the exact production version and is more reliable than the family name shown on the fascia.
Where to lookCheck inside the door opening, around the door frame and on the rear cabinet. Record the complete rating-plate information rather than the range name on the control panel.
- 01
Read the complete belt code and confirm its length, width and rib arrangement.
- 02
Check the drum, motor and support system turn freely before replacing a broken belt.
- 03
Treat an operated thermal device as a symptom until restricted airflow or another cause has been ruled out.
Repair safely
Before fitting a part
Disconnect the dryer before removing covers. If a thermostat or thermal cut-out has operated, check filters, the condenser and all airways so the underlying airflow problem is not left unresolved.
Ordering guidance
Common questions
Why do tumble dryer belts with similar lengths differ?
The rib count, width, elasticity and exact running length all matter. Use the full model reference and compare the code printed on the old belt where it remains legible.
Should I reset or replace a thermal cut-out?
First establish why it operated. Blocked filters, a restricted condenser, damaged ducting or another airflow problem can cause a replacement device to operate again.